Featuring

Optional Thermal Head Printer

Universal Voltage
External ECG Interface
Programmable R Trigger Delay
3 or 5 Selectable ECG Leads
Automatic R Wave Detection
Optional Rechargeable Battery

The AccuSync 72 ECG triggermonitor for gated cardiac studies automatically detects the R Wave with precision and reliability. Its menu-driven Color Active Matrix Display combines ease of use with increased functionality and flexibilitywhile its light and compact design makes it portable.

UL2601-1/CSA601.1 Certified by TUV Rheinland.

ECG Isolation Amplifier

PATIENT LEAKAGE CURRENT: ess than 10 μAwith 230 V~,60 Hzapplied to the patient leads. Patient related circuitry is isolated fromground by more than 4000 V, 5500 V peak.

DEFIBRILLATOR PROTECTION: 5000 V, 10ms duration.

COMMONMODE REJECTIONRATIO: 90db with 51 kOhmimbalance

INPUT IMPEDANCE: 100 MOhm

INPUT BIAS CURRENT: 50 nADC

ELECTRODEOFFSET POTENTIAL: +/- 0.5V

SENSITIVITY: 100mV peak

DISPLAY

Display Area: Height=98mmWidth=132.48mm
Display indicates: heart rate, R-R interval, ECGsize, ECGlead selection, audio, freeze and print indicator, Rtrigger event marker.
Menudriven selection of parameters displayed on 16 colorTFTActiveMatrix Display

OUTPUTS

1) The Rtrigger is a 5V TTL/CMOS (or 12V) compatible square wave for the computer trigger; independent of ECGsignal polarity. R Wave detection and trigger to computer is indicated by audio signal and by presence of a superimposed dot on the R Wave which appears on display. The output can deliver 35 mAof current or drive up to 150 feet longRGU 174/U cable. R trigger is compatible with all computers including Adac, DEC, Elscint, GE, Hitachi, MDS, Picker (Marconi), Sopha,

2) RS232 interface available to transmit and receive information via an IBM or compatible computer. In transmit mode, the interface will sendthe ECGdata to the computer while in receiver mode the computer will control the parameters of the instrument.

3) ECGOutput: Variable gain analogECG signal up to x2000 available on a BNC connector

DIMENSIONS: Height 6.0”Width 9.0” Depth 7.0”
CONSTRUCTION: Aluminum
POWER: 100-240 V~ 60/50 Hz 35 VA

OPTIONS

1) THERMAL CHART RECORDER

Paper Speed: 25mmper second. When FREEZE is selected, recorder prints last 8 sec of data.
PrintingMethod: thermal line dot system.
Resolution: Horizontal-8 dots per mm. Vertical-16 lines per mm.
Event Marker:When RWave is detected, amark is superimposed on the RWave to indicate the presence of an R
trigger signal triggering the computer.

2) BATTERY: NickelMetal Hydride (NiMH) 12V
3) PROGRAMMABLE R TRIGGER DELAY : Allows user to delay R trigger output up to 1000 ms. Result appears on TFT display.